Teledyne Oxygen sensor A-2C for general purpose trace oxygen analysis
Part Number: A-2C
Product Name: Teledyne Oxygen sensor
Origin: USA
Manufacturer: Teledyne
Used for trace Oxygen (O2) measurements in Carbon Dioxide (CO2) containing backgrounds (0.1-100% CO2). CO2 must be present.
Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
| Model | Part Number | Description | Applications |
|---|---|---|---|
| A-2C | C6689-A2C | Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. | Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present. |
| A-2CXL | B74033-A2CXL | Specially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm. | Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present. |
| A-5 | C6689-A5 | Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0-100% CO2. 90% response time is 45 seconds. | Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration. |
| B-1 | C6689-B1 | General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds). | Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas. |
Transmitter, Safety barriers, Flow meters, Probe, Sensor, Transducer, Valves, Analysis meter, Positioner, Actuator, etc.
Contact Us at Any Time