Do domu
>
produkty
>
GE Bently Nevada
>
25.4 mm/s Bently Nevada Seismic Transmitter 177230-02-02-05 in stock
|
25.4 mm/s Bently Nevada Seismic Transmitter 177230-02-02-05 in stock
| Miejsce pochodzenia | USA |
| Nazwa handlowa | BENTLY NEVADA |
| Orzecznictwo | ROHS |
| Numer modelu | 177230-02-02-05 |
Szczegóły produktu
Produkcja:
Bently’ego Nevadę
Nr produktu:
177230-02-02-05
Typ produktu:
Nadajnik sejsmiczny
Certyfikat:
Można dodać świadectwo pochodzenia (COO)
Opcja zatwierdzenia przez agencję:
05 = Zatwierdzenie wielokrotne
Zakres pomiarowy:
0 – 25,4 mm/s (0 – 1,0 cala/s)
Częstotliwość:
10 Hz do 1 kHz (600 do 60 kcps) rms
Waga przesyłki:
1,0 kg
Podkreślić:
Bently Nevada seismic transmitter 25.4 mm/s
,GE Bently Nevada transmitter 177230-02-02-05
,seismic transmitter with warranty in stock
Warunki płatności i wysyłki
Minimalne zamówienie
1
Cena
negotiable
Szczegóły pakowania
Karton
Czas dostawy
1 Tygodnie
Zasady płatności
T/T
Możliwość Supply
100+szt.+8-10 tygodni
Opis produktu
Description
The 177230 Seismic Transmitter combines a reliable basic protection solution
with the support and service of GE products. The transducer is a simple, loop
powered device whose ease of installation and maintenance may reduce
training and service costs. When integrated into the PLC or controls system of an
overall plant asset condition monitoring solution, the transducer will help you
better manage downtime, optimize maintenance planning, and avoid
unforeseen catastrophic failures of machinery assets.
Features of the 177230 Seismic Transducer include:
Ease of implementation and use
-
Interfaces with PLCs and control systems (like DCS and
SCADA)
-
Provides a quick learning curve for operations and
maintenance –through a familiar interface similar to that
for connecting other PLC or control system inputs
-
Requires no field configuration or adjustments
-
Needs few additional parts for a complete system
-
Includes technical support for customers on how to
monitor their equipment
-
Includes self-test
-
Incorporates protected interface
-
Supports a variety of interface cables
Data Quality
-
Provides accurate and repeatable data
-
Uses simple data format
-
Provides raw vibration signal for verification and analysis
EHS Compliant
-
Implements safe and ergonomic design
-
Supports access to hazardous areas
Incorporates robust CM design for reliability
Implements Industry standard 4 to 20mA loop-powered transmitter
GE Bently Nevada Seismic Transmitter 177230-02-02-05
Specifications
Electrical
Sensitivity – Main
loop (Signal One)
0.0 to 12.7 mm/s (0 to 0.5 in/s)
0.0 to 25.4 mm/s (0 to 1.0 in/s)
0.0 to 50.8 mm/s (0 to 2.0 in/s)
10% FS, broadband rms (root
mean square)
[4 ± 0.3 mA equals 0.0 mm/s and
20 ± 2 mA equals 25.4 mm/s]
Output Format,
Pin A Referenced
to Pin B
4 to 20 mA current loop Velocity
vibration
Excitation
Voltage
12 to 30 Vdc (current limited to 40
mA)
Note: This product is for use with PLCs, DCS
and SCADA systems that have internal
power supply that are typically current
limited in the range of 30 mA to 35 mA.
Settling Time
Less than 15 seconds within 2% of
final value
Connector Wiring
Convention
Pin A: 4-20 mA Positive Loop
Pin B: 4-20 mA Negative Loop
and common for Dynamic
Signal
Pin C: Dynamic Signal in voltage,
unbuffered
Frequency
Response
10 Hz to 1 kHz (600 cpm to 60
kcpm) 10%
Sensitivity –
Dynamic Signal
(Signal Two)
10.2 mV/m/s2 (100 mV/g) 20%
Output Format,
Pin C
Referenced to
Pin B
Voltage, Acceleration vibration
Note: The Dynamic Signal Negative (Pin B)
requires isolation from any grounding. If
this terminal is grounded, the 4-20 mA
loop will short, resulting in no output.
Frequency
Response
1Hz to 10 kHz ( 60cpm to 600
kcpm) 3 dB
Linearity
1%
Output Bias
Referenced to
Pin B
2.5 V 0.1 V
Full Scale Range
147 m/s2 ( 15 g’s) peak
Velocity Range
(see Option AA
and BB)
0 – 12.7 mm/s (0 – 0.5 in/s)
0 – 25.4 mm/s (0 – 1.0 in/s)
0 – 50.8 mm/s (0 – 2.0 in/s)
Mounted
Resonant
Frequency
Greater than 12 kHz
Transverse
Sensitivity
Less than 5% of sensitivity
Sensing
Element Type
Ceramic / Shear
Related Products
Frequently Asked Questions
Are your products new and original?
Yes, all products are new and original from manufacturer.
What is the warranty period?
One-year warranty is provided.
Can you provide product certificates?
Certificates are available depending on product specifications. Please consult our sales team for details.
What payment methods do you accept?
We accept T/T, Alipay, PayPal in EURO, USD, and RMB currencies.
What are your shipping options?
We ship worldwide via DHL, UPS, FedEx, TNT and various regional carriers.
Product Range
Our comprehensive product portfolio includes transmitters, safety barriers, flow meters, probes, sensors, transducers, valves, analysis meters, positioners, actuators, and related industrial components.
Zalecane produkty
Skontaktuj się z nami w każdej chwili
86-755-26850710
Mieszkanie 10, 6/F, blok A, Hi-Tech Ind. Ctr. 5-21 Pak Tin Par St, Tsuen Wan, HK
