خونه
>
محصولات
>
ابزار E&H
>
Bently Nevada 330500-02-02 8mm Proximity Probe With AISI 304 Stainless Steel Case And Alumina Ceramic Tip
|
Bently Nevada 330500-02-02 8mm Proximity Probe With AISI 304 Stainless Steel Case And Alumina Ceramic Tip
| محل منبع | ایالات متحده آمریکا |
| نام تجاری | Bently |
| گواهی | Rohs |
| شماره مدل | 330500-02-02 |
جزئیات محصول
وزن خالص:
1 کیلوگرم
منبع تغذیه:
24 VDC
ماده نوک کاوشگر:
سرامیک آلومینا (Al2O3)
مواد مورد پروب:
فولاد ضد زنگ AISI 304
محدوده خطی:
1.52 میلی متر (60 میل)
طول کابل پروب:
0.5، 1، 2، 5 یا 9 متر
شرایط پرداخت و حمل و نقل
مقدار حداقل تعداد سفارش
1 عدد
قیمت
negotiable
جزئیات بسته بندی
بسته بندی اصلی
زمان تحویل
در صورت درخواست
شرایط پرداخت
T/T
قابلیت ارائه
50 عدد در ماه
توضیحات محصول
Product Description
330500-02-02 - Velomitor Piezo-velocity Sensor
Product Configuration
330500-AA-BB
A: Mounting Thread Adaptor Option
A: Mounting Thread Adaptor Option
- 00 - No adapter
- 01 - 1/2 - 20 UNF
- 02 - M8 x 1
- 03 - 1/4 - 28 UNF
- 04 - 1/4 - 20 UNC
- 05 - Unavailable for 330500
- 06 - 5/8 - 18 UNF
- 07 - 3/8 - 16 UNC
- 08 - 1/2 - 13 UNC
- 00 - Not required
- 01 - CSA/US/C
- 02 - ATEX (European)
- 04 - Multiple approvals (CSA, ATEX)
Note: For 1/4-18 NPT mounting, order 330525.
Interconnection Cables
Standard Cable Lengths
| Feet | Meters (approximate) |
|---|---|
| 6 ft | 1.8 m |
| 8 ft | 2.4 m |
| 10 ft | 3.0 m |
| 12 ft | 3.6 m |
| 15 ft | 4.5 m |
| 17 ft | 5.0 m |
| 20 ft | 6.0 m |
| 25 ft | 7.6 m |
| 30 ft | 9.0 m |
| 33 ft | 10.0 m |
| 50 ft | 15.2 m |
| 99 ft | 30.0 m |
Custom Cable Part Numbers
You can order custom cable lengths in increments of 1.0 ft (305 mm) at additional cost. Some cables have minimum and maximum length requirements.
| Part Number | Description |
|---|---|
| 9571-NN | Two-conductor twisted, shielded 22 AWG cable with two-socket moisture-resistant female connector at one end, terminal lugs at the other end. Used with monitors. Not for use with 21128 Velocity Transducer Housing. Min. length: 2.0 ft (0.6 m) Max. length: 99 ft (30 m) |
| 84661-NN | Two-conductor twisted, shielded 22 AWG armored cable with two-socket moisture-resistant female connector at one end, terminal lugs at the other end. Used with monitors. Not for use with 21128 Velocity Transducer Housing. Min. length: 3.0 ft (0.9 m) Max. length: 96 ft (29 m) |
| 89477-NN | Two-conductor 18 AWG twisted, shielded cable with right angle two-socket plug at one end, terminal lugs at the other end. Used with monitors and with 21128 Velocity Transducer Housing. Min. length: 2.0 ft (0.6 m) Max. length: 99 ft (30 m) |
| 125065-NN | Two-conductor 18 AWG twisted, shielded cable with two-socket plug and fluorosilicone elastomer boot at one end, terminal lugs at the other. Used with monitors. Not for use with 21128 Velocity Transducer Housing. Min. length: 2.0 ft (0.6 m) Max. length: 99 ft (30 m) |
Velocity Transducer Housing Assembly
21128-AA-BB
A: Mounting Thread Option
A: Mounting Thread Option
- 01 - Unthreaded
- 02 - 3/4 - 14 NPT
- 03 - 1/2 - 14 NPT
- 04 - 1/2 - 12 BSP
- 01 - 1/2 - 14 NPT plug
- 02 - 1/2 -14 NPT explosion-proof
- 03 - 1/2 -14 NPT explosion-proof with cable gland seal
Note: When using the 21128 Housing, cable part number 89477-AA is necessary to connect the Velomitor Sensor to a monitor.
Velocity Transducer Housing - CENELEC Approved
107770-AA-BB
This version is a combination of the 330500 Velomitor Sensor and a 21128 Housing pre-installed at the factory. It is also rated for CENELEC Zone 1, Group IIC hazardous area applications. A: Mounting Thread Option
This version is a combination of the 330500 Velomitor Sensor and a 21128 Housing pre-installed at the factory. It is also rated for CENELEC Zone 1, Group IIC hazardous area applications. A: Mounting Thread Option
- 01 - Unthreaded
- 02 - 3/4 - 14 NPT
- 03 - 1/2 - 14 NPT
- 04 - 1/2 - 14 BSP
- 01 - 1/2 - 14 NPT plug
Accessories
| Part Number | Description |
|---|---|
| 100076 | 330500 Velomitor Sensor and Velomitor XA Sensor User Guide |
| 02173006 | Bulk cable; 2 conductor 18 AWG twisted, shielded cable without connectors or terminal lugs. Specify number of feet. |
| 46000-01 | Magnetic Base for temporary mounting of Velomitor Sensors. Used with 1/4 - 28 UNF mounting thread adapters. |
| 46122-01 | Quick Connect for semi-permanent mounting of Velomitor Sensors. Used with 1/2 - 20 UNF mounting thread adapters. |
| 89409-01 | Individual 1/2 - 20 UNF mounting adapter. |
| 89410-01 | Individual M8 x 1 mounting adapter. |
| 89411-01 | Individual 1/4 - 28 UNF mounting adapter. |
| 89412-01 | Individual 1/4 - 20 UNC mounting adapter. |
| 89413-01 | Individual 1/4 - 18 NPT mounting adapter. Spares only. For new installations, order 330525 velometer. |
| 04300015 | Individual 5/8 - 18 UNF mounting adapter. |
| 165025-01 | Individual 3/8-16 UNC mounting adapter. |
| 161191 | Individual 1/2 - 13 UNC mounting adapter. |
The Velomitor Sensor is shipped with an adapter. Individual adapters are available as spares.
محصولات توصیه شده
-
ویدیو
در هر زمان با ما تماس بگیرید
86-755-26850710
آپارتمان 10، 6/F، بلوک A، Hi-Tech Ind. Ctr. 5-21 پارک پکن، Tsuen Wan، HK
